• Penn Aarup posted an update 2 years, 5 months ago

    An ornamental molding is a any continuous projection which is used to further improve the appearance of a wall. In ancient Greece, they were first utilized to throw water from the wall. The contours, measurements, and projections of moldings vary greatly.

    Frieze

    One type of molding – the frieze (or frieze board) – was first applied to the Parthenon in the Acropolis. The frieze is considered included in the Greek architectural style.

    The Parthenon was produced for the goddess Athena. The frieze moldings which were used were intended to tell the story of her overcome Poseidon to become the patron of the ancient city that is now Athens.

    The frieze panels can be a series of designed pediments that happen to be stuffed with the pictures of Athena’s birth and rise to power. Today, a frieze board could be the lcd just under a crown molding or cornice. Often, low relief is used for this panel with regard to added decoration.

    Today, frieze moldings are most popular as a part of an ornamental molding that follows the neoclassical architecture or decorating style.

    You’ll need a pretty high ceiling (at least 9 feet), and it is a good idea to paint or stain the frieze as well as the crown molding exactly the same color. The frieze is a great method to visually bring the ceiling down to make the space appear cozier.

    Crown Molding

    Crown molding is among the most popular form of cornice molding. Crown molding generally is a single-piece of decorative molding, installed towards the top of a wall, in an angle to the adjoining ceiling. However, I know of crown molding assemblies of 5 or more pieces in additional elaborate settings.

    Crown molding often has a profile that projects on the ceiling and around the wall, adding an abundant appearance with a room. It’s used near the top of cabinets or built-in furniture.

    Introducing this type of decorative molding with a easy room provides a historic character that this room may not otherwise have. Crown molding can be used in combination with other moldings to add details to fireside mantels and shelves. (For the purpose it’s worth, this is the best architectural feature).

    Crown molding is often a way of Cornice Molding. The phrase "cornice" describes molding installed down the the surface of a wall or over the window. Once this therapy is created from multiple components of molding, method . a "build-up cornice." The opposite way of cornice molding will be the Cove Molding.

    Cove Molding

    Cove molding is incredibly just like crown molding, with the same application and function. The main difference backward and forward influences profile. Cove molding carries a concave profile (which bows inward) while crown molding has a convex (outward) profile.

    While crown is most at home in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. You do not normally see multi-piece assemblies of cove moldings. You are able to occasionally see it "beaded" at bottom and top for the little accent.

    Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens and also other more functional regions of your home could be in places you will see the more form of the cove molding. Over the years, coves and crowns have become smaller, but a majority of still bear the shapes and styles with the original Greek and Roman designers.

    Chair Rail Molding

    A seat rail is a decorative molding that divides a wall horizontally, usually about 32" to 36" above the floor. They protect the walls in locations damage might occur from people waking up beyond chairs.

    Because of this, the harder traditional chair rails will have a nosing in the center, with curved and beveled surfaces that taper time for the wall above and beneath the nosing.

    Today, chair rails remain a typical detail in traditional interiors. They serve the decorating effect of unifying the different architectural specifics of an area, like door and window trim, and fireplace surrounds.

    Chair rail may also be used as being a cap for wainscoting or other wood paneling. This decorative molding adds a sense of detail and charm while achieving continuity inside a room by unifying the different decorative elements.

    Panel Molding

    Panel molding, commonly termed as a picture frame molding, appears to be a substantial empty frame, and it is often section of designs on walls of old Colonial and, Georgian, and Early American homes. The placement on this molding must be above the chair rail height contributing to 10 to 12 inches down from the ceiling.

    The size of this type of decorative molding, measuring 1" to 3" wide, needs to be proportionate for the ceiling height from the room. Like the other moldings, panel molding adds a sense of charm and delicate detail with a room.

    Wall framing appears with the Georgian time period of American architecture, when plaster began to replace wood panels for the walls. Panel molding is another fantastic way to divide walls into large, good to look at units, minus the same worth of full wall paneling.

    Another application of this versatile molding is always to trim openings produced by wider planks which are assembled as rails and fashoins. Often, the centers of such frames are still open. By utilizing panel moldings around the perimeter of the opening, you create the appearance of a photo frame.

    If this decorative molding is painted within the same color because the surrounding walls, you use a sculptural quality into a wall, adding texture and shadows. If moldings are painted in contrasting colors, they can develop a striking three dimensional appearance, giving depth and dimension. This sort of therapy is popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the foot of the wall from ware and tear, while hiding openings as well as other irregularities where the wall meets the bottom. Base moldings give the floor line a higher profile, and could be as elaborate or simple as you wish.

    Whereas it is not too difficult to install chair rail with a level plane, baseboard (like crown) can be tricky in case your floors (or ceilings) are certainly not level. For this reason, I recommend obtaining a professional woodworker to the installing these moldings.

    As one remedy to uneven floors, you can use a "shoe molding" across the bottom front edge to own baseboard a finished look. Something more important that can be done with baseboard (in addition to with all the toe kick of the kitchen cupboards) is incorporate accent lighting.

    This isn’t in line with the pure traditionalist, however it is quite a nifty strategy to have accent lighting round the perimeter of your room. You couldn’t make this happen until they made the small LED rope lights nowadays.

    Rope lights can be found in different lengths and colours, and could be easily installed behind baseboard. Just be a notch inside the back side from the baseboard, at the very top, and run the rope lights in to the notch.

    This can be more frequently found in commercial spaces, but has been put in entries and hallways – particularly in contemporary homes.

    Flexible Moldings

    In case you have a curved wall or arch, you are able to sure enough have a good craftsman create a curved molding for approximately 3 x the price of an upright molding. Or, you can purchase a versatile molding for about a similar price because straight one.

    These allow you to install moldings onto curved surfaces or arches, with no delay and expense of keeping them made out of wood. The stock profiles (you’ll find hundreds) are identical to the rigid versions and they are compatible so far as paint finish is concerned.

    Check out about ecomoulding please visit web page:
    learn here.